What should you pay attention to when using the oil filter?

September 19, 2024

Oil filter, also known as oil purifier. As its name suggests, its role is to purify contaminated oil products, and to effectively remove impurities from oil products , , in order to ensure safe operation of oil equipment. So what should you pay attention to when using the oil filter?

First, the pump cannot be reversed when the oil filter is started, so that the shaft seal of the oil suction pump is blown out to cause the air to be sucked in, and the air in the oil suction process should open the exhaust valve in time, and then close the exhaust valve after draining the air. When the sound of the pump becomes large during the oil suction process, the oil suction is not smooth. Please consider whether the coarse filter before the pump is blocked, and then take it out and clean it before use. Moreover, when the oil filter is applied to a certain extent, the filter element inside will be fouled, the pressure difference will increase, and the filtering capacity will be reduced. When the pressure difference reaches 035Mpa, the filter element needs to be replaced. If there is a problem with the operation of the oil filter or if the filtration effect is not as good as expected, please contact us for adjustment.

Replacement steps: first cut off the power, then close the inlet and outlet ball valve, rotate the upper cover handle counterclockwise, remove the upper cover, pull out the old filter, insert a new filter, press the small red column, turn the cover clockwise, loosen Exhaust wire plugging, starting system, after the gas is discharged, tighten the exhaust wire plug, test run, check the filtering effect, and give feedback to the manufacturer in time.

There is no need to replace the hydraulic system oil in 7-10 years, which saves the cost of large oil purchases, and the service life of hydraulic components is extended by 2-10 times, eliminating the cost of component replacement and reducing the equipment failure rate by 95%, effectively avoiding the loss of work due to downtime. Loss, hydraulic equipment saves 8-10% of energy, saves fuel, saves electricity, zero faults, improves yield and lowers production costs. Kunshan Fengya is trustworthy because of its professionalism!